overview

The DLA line of differential transmissions provide a narrow band of variable output speed ( +/- 0.50 to 10% of output speed) while at the same time insuring that any speed set within this band will hold as well as fixed gearing ( i.e. less then +/- 0.005% deviation).

Therefore, the DLA provides the accurate speed setting and precise holding required to insure web or strip tension control.

The drives consist of an differential drive enclosed in a nearly cubic housing with co-axial input and output shafts, and a speed correction flange. Mounted on top is a high-qulaity, all steel H-Drive Mechanical Speed Variator, connected by timing belts to the input shaft and correction flange, to form a closed loop mechanical system. It is also possible to replace the mechanical variator with a variable speed electric motor.

Although this product is no longer available for new applications, Andantex continues to offer after market support and service from our facility in New Jersey.

features

Three standard sizes
Maximum torque capacity in minimum space, up to 12,400 lb. in.